PART TYPE |
HOW USED
|
QTY FOR USE
|
12" Angle Bracket
16" Angle Bracket |
Angle Brackets are used to provide under shelf support, provide J-Hook attachment and allow for free hanging shelves (those with no sidewall attachment)
When using angle brackets for hanging metal bars, one angle bracket is required for every J-hook |
For shelf or garment bar spans, you will typically use:
Qty: 2 - 72" or below
Qty: 3 - 73" to 98"
Qty: 4 - 99" or Above |
Wood Bar Spacer |
Wood Bar spacers hold the wood garment bar to the wood shelf They secure into the back of the garment bar & the back of the shelf rail. |
For wood garment bar spans, you will typically use:
Qty: 2 - 72" or below
Qty: 3 - 73" to 98"
Qty: 4 - 99" or Above |
Wood Garment Bar |
To hang a wood garment bar you will need to use Wood Bar Spacers. |
(See Bar Spacer for more information) |
Metal Garment Bar |
To hang a metal garment bar you will need to use J-Hooks, Bar End Caps & Angle brackets |
(See J-Hooks, Bar End Caps & Angle Brackets for more information) |
J-Hooks |
J-Hooks are attached to angle brackets and used to hold metal garment bars. |
For metal garment bar spans, you will typically use:
Qty: 2 - 72" or below
Qty: 3 - 73" to 98"
Qty: 4 - 99" or Above
|
Bar End Cap |
Bar end caps are attached to the ends of metal bars to prevent a hanger from sliding off.
|
Typically you will use:
Qty: 2 - Per Bar |
L-Clip Hardware |
L-Clip's are installed on the wall and required to secure the back of the shelf. L-Clips are typically placed every 16" & secured to wall stud. If no Stud is present, use 50# Drywall Anchors |
Typically you will use:
Qty: 6 per 8 ft. shelf span
When possible L-Clips should be placed every 16" & secured to wall stud.
If no Stud is present, use 50# Drywall Anchors |
Shelf End Hardware |
Required to support the front of the shelf rail to a side wall, tower side or an opposing shelf to extend shelf spans or create perpendicular shelves.
If you are not connecting the end of a shelf to a sidewall, tower or to another shelf you will not need a shelf end but instead you will use angle brackets. |
Typically you will use:
Qty: 2 per shelf end
If no Stud is present, use 50# Drywall Anchors |
Vertical Clip Hardware |
12" Standard Closet Use: Vertical Clip hardware is used to connect a Garment Bar (when used vertically) to the top shelf rail and bottom shelf rail.
For 12" Premier & 16" Deluxe Closet Use:
Vertical Clip hardware is used to secure the top of a tower side to a shelf slat. |
Typically you will use:
Qty: 4 - Per each type of us |
